Double-Way Component Speaker System Car Speakers Audio

46CSS684    CS Series 6x8" 75W RMS (225W Peak Power Handling) 2-way Component Speaker System

Diameter : 6x8 Inch

Sensitivity : 90 dB

Frequency Response : 40-21000 Hz

Peak Power Handling : 225 Watts

RMS Power Handling : 75 Watts

Features:

Fits nearly every car made

12dB crossovers with a smaller footprint for easier installation

Three-position tweeter switch for dialing in your highs

EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

Titanium tweeter construction and neodymium magnets to reveal subtle details

UV-treated poly-foam surround assists with precise linear excursion

Phase plugs in the woofer cones eliminate any distortion

Steel mesh grilles protect your drivers

Three tweeter mounting options including flush, angled and surface pods

Specifications:

Woofer Size | in [mm]: 6x8 [160x200]

Tweeter Size | in [mm]: 3/4 [20]

Dome Material: Titanium

Peak Power | [watts]: 225

Continuous Power | [watts RMS]: 75

Effective Frequency Range | Hz: 40-21k

Woofer Mounting Hole Diameter | in [mm]: 5 x 7 3/16 [126x182]

Woofer Bottom Mount Depth | in [mm]: 2 3/16 [56]

Flush Mounting Tweeter Hole Diameter | in [mm]: 1 9/16 [40]

Flush Mount Tweeter Depth | in [mm]: 9/16 [14.5]

High Pass | dB, at Frequency | Hz: 12, 4000

Low Pass | dB, at Frequency | Hz: 12, 4000

High Frequency Output Attenuation | dB: 0, 3, & 6

Bolt-Thru Grilles: Yes

Weight: 8

46CSS674   CS Series 6-3/4" 100W RMS (300W Peak Power Handling) 2-way 4 Ohm Component Speakers System

Diameter : 6.75 Inch

Sensitivity : 90 dB

Frequency Response : 35-21000 Hz

Peak Power Handling : 300 Watts

RMS Power Handling : 100 Watts

Features:

Fits nearly every car made

12dB crossovers with a smaller footprint for easier installation

Three-position tweeter switch for dialing in your highs

EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

Titanium tweeter construction and neodymium magnets to reveal subtle details

UV-treated poly-foam surround assists with precise linear excursion

Phase plugs in the woofer cones eliminate any distortion

Steel mesh grilles protect your drivers

Three tweeter mounting options including flush, angled and surface pods

Specifications:

Woofer Size | in [mm]: 6 3/4 [165]

Tweeter Size | in [mm]: 3/4 [20]

Dome Material: Titanium

Peak Power | [watts]: 300

Continuous Power | [watts RMS]: 100

Effective Frequency Range | Hz: 35-21k

Woofer Mounting Hole Diameter | in [mm]: 5 1/2 [140]

Woofer Bottom Mount Depth | in [mm]: 1 13/16 [47]

Flush Mounting Tweeter Hole Diameter | in [mm]: 1 9/16 [40]

Flush Mount Tweeter Depth | in [mm]: 9/16 [14.5]

High Pass | dB, at Frequency | Hz: 12, 4000

Low Pass | dB, at Frequency | Hz: 12, 4000

High Frequency Output Attenuation | dB: 0, 3, & 6

Bolt-Thru Grilles: Yes

Weight: 8

46CSS654   CS Series 6-1/2" 100W RMS (300W Peak Power Handling) 4 Ohm Component Speaker System

Diameter : 6.5 Inch

Sensitivity : 90 dB

Frequency Response : 35-21000 Hz

Peak Power Handling : 300 Watts

Shallow Mount : No

RMS Power Handling : 100 Watts

Features:

Fits nearly every car made

12dB crossovers with a smaller footprint for easier installation

Three-position tweeter switch for dialing in your highs

EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

Titanium tweeter construction and neodymium magnets to reveal subtle details

UV-treated poly-foam surround assists with precise linear excursion

Phase plugs in the woofer cones eliminate any distortion

Steel mesh grilles protect your drivers

Three tweeter mounting options including flush, angled and surface pods

Specifications:

Woofer Size | in [mm]: 6 1/2 [160]

Tweeter Size | in [mm]: 3/4 [20]

Dome Material: Titanium

Peak Power | [watts]: 300

Continuous Power | [watts RMS]: 100

Effective Frequency Range | Hz: 35-21k

Woofer Mounting Hole Diameter | in [mm]: 4 13/16 [123]

Woofer Bottom Mount Depth | in [mm]: 1 11/16 [43]

Flush Mounting Tweeter Hole Diameter | in [mm]: 1 9/16 [40]

Flush Mount Tweeter Depth | in [mm]: 9/16 [14.5]

High Pass | dB, at Frequency | Hz: 12, 4000

Low Pass | dB, at Frequency | Hz: 12, 4000

High Frequency Output Attenuation | dB: 0, 3, & 6

Bolt-Thru Grilles: Yes

Weight: 10

2XL-63C    6.5", 120W RMS (240W Peak Power Handling), 2-Way Component Car Audio Speaker System, 3-ohm

Diameter : 6.5 Inch

Sensitivity : 91 dB

Frequency Response : 59-20000 Hz

Peak Power Handling : 240 Watts

Shallow Mount : No

RMS Power Handling : 120 Watts

6.5" 2-Way Component Speaker System

Hybrid 4 Layer Paper/Wool Blend Woofer Cone 

Butyl Rubber Surround 

Bilit Aluminum CNC Cut Phase Plug14 oz. Y-35 Woofer Magnet

EFF Motor Structures (Efficient Flux Field) 

Rigid Tooled Basket with Stainless Steel Finish 

1" Silk Dome Tweeter w/Neodymium Magnet 

Convertible Mount Tweeter for either Co-Axial or Standalone Tweeter Mount

Computer Aided External 12dB 2-way Crossover Network  

3-ohm System Impedance 

Weight: 7

MJP8   MOJO Pro Series 8" 200W RMS (400W Peak Power Handling) Component Subwoofer

Diameter : 8 Inch

Sensitivity : 102 dB

Peak Power Handling : 400 Watts

RMS Power Handling : 200 Watts

Features:

High efficiency mid range

Multi application use

Accordion cloth surround

Aluminum Dust Cap

Woofers sold individually

Specifications:

Size (in): 8"

RMS Power (w): 200

Peak Power(w): 400

Sensitivity (dB): 102

Mounting Depth (in): 3.19

Grill included

Weight: 6

46CSS694   CS Series 6x9" 150W RMS (450W Peak Power Handling) 2-way Component Speaker System

Diameter : 6x9 Inch

Sensitivity : 90 dB

Frequency Response : 30-21000 Hz

Peak Power Handling : 450 Watts

RMS Power Handling : 150 Watts

Features:

Fits nearly every car made

12dB crossovers with a smaller footprint for easier installation

Three-position tweeter switch for dialing in your highs

EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

Titanium tweeter construction and neodymium magnets to reveal subtle details

UV-treated poly-foam surround assists with precise linear excursion

Phase plugs in the woofer cones eliminate any distortion

Steel mesh grilles protect your drivers

Three tweeter mounting options including flush, angled and surface pods

Specifications:

Woofer Size | in [mm]: 6x9 [160x230]

Tweeter Size | in [mm]: 3/4 [20]

Dome Material: Titanium

Peak Power | [watts]: 450

Continuous Power | [watts RMS]: 150

Effective Frequency Range | Hz: 30-21k

Woofer Mounting Hole Diameter | in [mm]: 5 5/8 x 8 7/16 [143x215]

Woofer Bottom Mount Depth | in [mm]: 3 3/16 [81]

Flush Mounting Tweeter Hole Diameter | in [mm]: 1 9/16 [40]

Flush Mount Tweeter Depth | in [mm]: 9/16 [14.5]

High Pass | dB, at Frequency | Hz: 12, 4000

Low Pass | dB, at Frequency | Hz: 12, 4000

High Frequency Output Attenuation | dB: 0, 3, & 6

Bolt-Thru Grilles: Yes

Weight: 10

OE69C-GM   6"x9" 60W RMS (120W Peak Power Handling) OEM Replacement Component Speaker Chevy / GMC

Diameter : 6.5 Inch

Sensitivity : 88 dB

Frequency Response : 70-20000 Hz

Peak Power Handling : 120 Watts

RMS Power Handling : 60 Watts

Features:

6x9" Upgraded OEM Replacement Component Speakers

60 Watts RMS/120 Watts Max

Injection Molded PP Cone

Nylon OEM Speaker Adapter

2.75' High Bandwidth Midrange

20 oz. Magnet

Factory Plug and Play Wiring Adapters 

4-ohm System Impedance

Specifications:

Nominal Impedance: 4-ohm

Voice Coil Size: 1.0 in

Material: PP cone woofer & silk dome tweeter

Magnet Size: 10 ozSensitivity (1W / 1M): 88 dB

Dimensions (in Inches): 6.5 in

Mounting Depth: 1.6 in

Size: 6.5 in

Sensitivity: 88 dB

Frequency Response: 70 Hz - 20 kHz

Power Handling (RMS/Peak): 60 watts RMS/120 watts peak

APPLICATIONS 

Some vehicles are equipped with OEM co-axial system please use the OE692-GM for these applications

CHEVROLET / GMC

Avalanche

Caprice

Cruze

Express Van

HHR

Impala

Malibu

Orlando  

Silverado

SS

Suburban 

Tahoe

Trax

Volt

Acadia

Canyon

Sierra

Yukon

Hummer H3

Hummer H3T

BUICK / PONTIAC / SATURN

Buick Enclave

Buick LaCrosse

Buick Lucerne

Buick Regal

Buick Verano

Pontiac G6

Pontiac Solstice

Saturn Aura

Saturn Outlook

Saturn Sky

Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. 

Weight: 9

PRX50C   Power Reference Series 5-1/4" 50W RMS (100W Peak Power Handling) 2-way Car Component Speakers

Diameter : 5.25 Inch

Sensitivity : 88 dB

Frequency Response : 94-20000 Hz

Peak Power Handling : 100 Watts

Shallow Mount : No

RMS Power Handling : 50 Watts

Features:

Polypropylene cone

Butyl rubber surround

Separate poly dome tweeter

Separate crossoverPerfect for OEM factory applications

Stealthy black-on-black M-Cone design

Specifications:

Size (in): 5.25"

RMS Power (w): 50W

Peak Power(w): 100W

Sensitivity (dB): 88

Mounting Depth (in): 2.125"

Magnet Size (oz): 10

Grill included: Yes

Weight: 8

PR9610cs   Primus Series 6x9" 100W RMS (300W Peak Power Handling) 2-Way Component Car Speakers

Diameter : 6x9 Inch

Sensitivity : 89 dB

Frequency Response : 46-20000 Hz

Peak Power Handling : 300 Watts

Shallow Mount : No

RMS Power Handling : 100 Watts

What's Inside?

2 x Speakers

2 x Grilles

2 x Spacers

1 x Foam gasket

2 x Crossovers

2 x Tweeters

2 x Flush-mount cups

2 x Threaded flush-mount adapters

2 x Plastic locking nuts

2 x Surface-mount cups

2 x Starfish tweeter mounts

2 x Washers

2 x Scew nuts

18 x Screws

8 x Speed clips

2 x Brand stickers

1 x Owner’s manual

Specifications:

Patented Plus One™ Polypropylene

Woofers

Edge-Driven Tweeters

True 4 Ohm Architecture

Harman Standard Reliability Testing

Competitively Tuned

Infinity at an Affordable Price

Power Handling: 100W RMS, 300W peak

Sensitivity (@ 2.83V): 89dB

Frequency Response: 46Hz – 20kHz

Voice Coil Diameter: 1 in. (25mm)

Impedance: 2.7 ohms

Weight: 10

TS-D69C    D Series 6" x 9" 110W RMS (330W Peak Power Handling) 2-Way Car Component System

Diameter : 6x9 Inch

Sensitivity : 86 dB

Frequency Response : 33-49000 Hz

Peak Power Handling : 330 Watts

Shallow Mount : No

RMS Power Handling : 110 Watts

Features:

26mm POLYESTER SOFT DOME TWEETER 
Contoured from lightweight, resin-impregnated fibers of coated polyester fabric, the D tweeter delivers extended high-frequency performance. The 26mm diaphragm is very resistant to the harsh environmental conditions of the automotive interior (temperature, humidity, vibration, etc.), while maintaining its uniform hemispherical shape to reduce dome breakup due to excessive vibration at ultrasonic frequencies. The result is extremely low distortion levels and a smooth, natural sound. 

ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP) 
Polypropylene (PP) is a tough thermoplastic resin, ideal material for a speaker cone. The low mass and high damping of a PP cone generate good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting aramid fiber interlaced IMPP cone is ultra-thin and low mass with high rigidity and superior strength, built to produce natural, detailed sound with deep and powerful bass.

COMPACT SWIVEL TWEETER WITH TRI-POSITION MOUNTING KIT
More than any other speaker, the positioning and mounting location of the tweeter is crucial to the stereo imaging of the system and the overall listening experience. To ensure installation flexibility, the D component system tweeters are extremely compact and feature a unique swivel mount that allows precise aiming of high frequencies. Pioneer’s tri-position mounting kit (included) provides the flexibility to mount the tweeter using a variety of methods; flush mount, surface mount or bracket mount, especially important for concealing the tweeter behind an original equipment tweeter grille in the vehicle dash or door. 

Specifications:

SYSTEM

System Type: 2-way Component 

Sound Pressure Level (Sensitivity): 86dB (+- 1.5dB)

Frequency Range: 33 Hz to 49 kHz

Continuous Power Handling (RMS): 110 Watts 

Maximum Peak Power Handling: 330 Watts 

Nominal Impedance: 4 ohms 

WOOFER

Diameter: 6' x 9'

Cone Material: Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP)

Center Cap Material: Polyethylene Terephthalate (PET)

Surround Material: Butyl Rubber 

Magnet Material: Ferrite

Magnet Weight: 15.2 oz 

TWEETER 

Type: Soft Dome 

Diameter: 26mm

Diaphragm Material: Polyester

Magnet Material: Neodymium 

Magnet Weight: 6.4 g 

Swivel Type: Yes 

CROSSOVER NETWORK

Crossover Frequency: 3500 Hz

Approximate Weight:

Shipping: 8 lbs

Weight: 8

Illustrate

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Please refer to the actual product. The measurement allowed error is +/- 1-3cm.

Unshipped Items Return Policy

35 % restocking fee will be charged for unshipped item returns without valid reason within 30 days of the original order being processed.

Shipped Items Return Policy

For quality or other issues, the Buyer can request a refund or reshipment within 7 days after the end customer has received the item. The reshipment fee will be borne by the Seller.

*Product Notes:  

1. For any product problems, you must provide communication vouchers, pictures, videos, etc. with the seller.

2. If the product is returned to the overseas warehouse due to the wrong address, no refund will be given.

3. No reason to return any non-product problems, such as the following wrong order, wrong purchase by customer, customer dislike, etc.

4. Please contact the online customer service before returning the product for a refund, otherwise the return will not be refunded.

5. Items must be unworn, undamaged and in original packaging.

Note:

Dropshipping to 48 states in the United States. Some remote states in the United States (short code: PR, HI, VI, AE, AP, AK, GU, AS, MP) do not provide a drop shipping service for the time being.